| Seal-A-Plate
Specifications |
|
|
|
| 1.01
System Description |
|
A. |
EPDM rubber roofing
loosely laid over insulation and held in place with I-90 steel discs. The discs are
covered with 7" x 7" cover tape (butyl/EPDM laminate) |
|
|
|
| 3.03
Installation Instructions |
|
A. |
Install in accordance
with International Diamond Systems specification manual. |
|
B. |
Roll EPDM membrane
over insulation. Position without stretching. Allow to relax for 30 min. before
continuing. |
|
C. |
Place Seal-A-Plate
discs over EPDM sheet and mechanically fasten into roof deck. Clean and activate area over
and around disc. Place 7" x 7" cover tape over disc and roll with steel roller
to assure a water-tight seal. |
|
D. |
Join overlapping
seams with either International Diamond Systems splice adhesive and lap sealant or with
4" seam tape (seam tape does not require caulk.) |
|
E. |
Complete flashing
details for protrusions and walls in accordance with manufacturer's specifications. |
|
|
|
(to seal-a-plate) (to
specifications) |
