tag_line_l.jpg (2585 bytes) tag_line.jpg (5186 bytes)

Diamond 105 FM-190 Roofing System

THIS IS A GENERIC ESTIMATE OF MATERIALS NEEDED
for a DIAMOND 105 FM-190 ROOFING SYSTEM
  • Fill in the answers to the questions below for a sample generic estimate of materials needed to complete your roofing project.
  • Enter all values in whole numbers, rounded up.
  • Click [Estimate/Recalculate] button at bottom to display materials needed in table on the right >>>

Enter values (left) to automatically calculate QTY of materials needed below.
Fill in Unit Price below to calculate Total Cost.
Project Name:
Select Thickness of Rubber: inches
Select preferred Roll Width: feet
Select preferred Roll Length: feet
Length of Roof: feet
Width of Roof: feet
Height of Parapet Wall (in INCHES): inches
Length of All Parapet Walls Added Together (enter in TOTAL FEET): feet
Thickness of Parapet Wall (in INCHES): inches
Length of All Coping Added Together (enter in TOTAL FEET): feet
Length of All Drip Edge Added Together (enter in TOTAL FEET): feet
Length of All Gutter Added Together (enter in TOTAL FEET): feet
Number of Pipes larger than 6" in diameter: each
Number of Pipes from 1" to 6" in diameter: each
Number of other Protrusions: each
Number of Unflashable Items (smaller than 1" in diameter): each
Number of New A/C Units: each
Number of Existing A/C Units: each
Number of other Inside or Outside Corners: each
Number of Roof Drains: each
Number of feet of Walk Pad: feet

CLICK HERE TO ESTIMATE MATERIALS NEEDED:

MATERIALS  QTY UOM

UNIT PRICE

 TOTAL COST
Rolls of EPDM ( ft X ft) rolls $
Bonding Adhesive 5 gal pails $
105 plates Plates $
12" EPDM Flashing rolls $
Lap Caulking tubes $
Water Cut Off tubes $
Pourable Sealer gallons $
Splice Adhesive gallons $
7" Cover Tape rolls $
6" Cover Tape rolls $
4" Seam Tape rolls $
Pipe Boot / Witches Hat each $
Activator / Primer gallons $
Splice Cleaner gallons $
Termination Bar pcs $
Termination Bar Screws each $
Insulation sheets $
Insulation Clips boxes $
Deck Screws each $
Drip Edge feet $
Drip Edge Fasteners each $
Coping feet $
Walk Pad Rolls rolls $

Total Cost:

   
 

   

 

 Factory Mutual Systems Approved and UL Classified