| Diamond 105
Specifications |
|
|
|
| 1.01
System Description |
|
A. |
Non-penetrating EPDM
rubber roofing system, held in place by the patented 105 self-adhering plates. The 105
plates consist of butyl/EPDM laminate and a 4-inch, 16 gauge, galvanized steel disc. |
|
|
|
| 3.03
Installation Instructions |
|
A. |
Install in accordance
with International Diamond Systems specification manual. |
|
B. |
Place Diamond 105
self-adhering plates over the insulation at appropriate intervals and mechanically fasten
to the roof deck. |
|
C. |
Roll EPDM membrane
over the Diamond 105 plates. Position membrane without stretching. Allow EPDM membrane to
relax for 30 minutes before continuing with attachments, splicing or bonding. |
|
D. |
Fold one half of
membrane onto itself, exposing the underside. Using a sponge mop, lightly apply activator
to the membrane where each 105 plate will make contact. Remove release paper from 105
plates and carefully float membrane onto plates beginning at the fold. Repeat this
procedure for the remaining half of the EPDM membrane. |
|
E. |
Join overlapping
seams with either International EPDM splice adhesive and lap sealant or with 4" seam
tape (seam tape does not require caulk). |
|
F. |
Complete flashing
details for protrusions and walls. |
|
|
|
(to diamond 105) (to specifications) |
